ProjectTechnical specificationsOperating rangeX-axis300mmCustomizable itineraryY1 Y2 axis240mmDispensing Z-axis100mmCure the Z-axis60mmMachine dimensionsL550mmCustomizable sizesW550mmH740mmMachine compositionFive-axis machine + precision pin valve + UV curing system + CCD vision systemPower supplyAC
ProjectTechnical specificationsOperating Range (mm)X400*dual Y300*Z100X500*dual Y300*Z100X600*dual Y300*Z100Machine dimensions (mm)L710*W610*H660L810*W710*H660L910*W810*H660Machine weight60kg65kg70kgU-axis rotation360° rotationPower supplyAC 220V 50/60Hz 350WTop speed300mm/s (customizable)Repeatabi
ProjectTechnical specificationsOperating Range (mm)X300*Y300*Z100X400*Y400*Z100Machine dimensions (mm)L610*W610*H660L710*W710*H660Machine weight35kg40kgPower supplyAC 220V 50/60Hz 350WTop speed300mm/s (customizable)Repeatability± 0.02mm-0.05mm (customizable)Operating temperature/relative humidity5-
ProjectTechnical specificationsModelFWZDJA-Z1Spindle travelAdjustable from 50-100mmControl methodsPLC + touchscreenDisplay methodTouchscreen display and parameter inputPower supply/powerAC 220V 50/60Hz 200WFunction descriptionSupports full circle, single point, curve, multi-segment curve dispensing
ProjectTechnical specificationsModelFMAP-970Power supplyAC110~220V 50/60HzPower consumption11WInput signal startsFoot switch or input voltage N.O. contactAir source<0.99Mpa(Dry and clean air pressure)Dispensing pressure adjustment range1~700KpaFunctional modesFor timed and quantitative control mo
The bonding centering auxiliary device introduces our company's newly introduced multi-lens gluing centering device. Together with our reflector eccentric device, it achieves highly efficient and precise centering gluing. The measurement software can monitor the optical axis position in real tim
It is suitable for detecting eccentricity errors in feeding/outgoing single lenses and bonded lenses, as well as positioning and calibrating optical centers during lens bonding/assembly. Using transmission or reflection measurement modes, it meets the needs of circular lenses, square (or irregular)
The FWTCM-IV transmission eccentricity meter uses a cross-shaped splitting plate through an optical system to image the lens under test, rotates the lens under test, and checks the degree of deviation of the cross image to check the center deviation.Rotate around the outer circle of the lens; if the
The reflective eccentricity meter uses the reflection image of the lens center to check the deviation of the lens center. It can observe the reflection image of the center of the sphere on the upper surface of the lens, as well as the reflection image of the center of the sphere on other surfaces wi
SpecificationsModelTUV12050M5-2LTUV12050M5-5LPurposeUsed for lens lamination curing, can replace traditional UV light boxesNumber of layers2 layers, each independently controlled5 floors, each independently controlledUV unit2 sets of LED-UV modules5 sets of LED-UV modulesSingle-layer specificationL1
