Products
Products
Products
Specifications
| Model | TUV12050M5-2L | TUV12050M5-5L | |
| Purpose | Used for lens lamination curing, can replace traditional UV light boxes | ||
| Number of layers | 2 layers, each independently controlled | 5 floors, each independently controlled | |
| UV unit | 2 sets of LED-UV modules | 5 sets of LED-UV modules | |
| Single-layer specification | L1200xW500xH120(mm) | ||
| UV wavelength | 365nm±5nm | ||
| UV exposure intensity#Note | 5~50mW/cm², programmable adjustable, light uniformity up to 95% | ||
| Display/Settings/Operations | Touchscreen display, settings, and operation | ||
| Illumination mode | Automatic illumination | Set irradiation power and duration, and complete irradiation according to the set duration [Irradiation duration range: 0 - 9999.9 seconds (interval 0.1 seconds)] | |
| Manual irradiation | Set the illumination power and manually control the duration or prolonged illumination | ||
| Step-up illumination | Multiple steps and loop counts are set; Set the irradiation power and duration for each step, operate according to the set cycle count, and operate according to the step parameters | ||
| Dimming/illumination control | Precise digital dimming, manual illumination control or timer control [0 - 9999.9 seconds (interval 0.1 seconds)] | ||
| LED temperature detection | Equipped with thermistors to monitor LED lamp temperature control | ||
| LED light source abnormal feedback | LED light source fault feedback, bright feedback, over-temperature error | ||
| LED light source cooling method | Forced air cooling of the fan | ||
| Input voltage/frequency | AC 220V 50Hz / 60Hz | ||
| #Note: Based on our measurement benchmark, the values are representative values and not guaranteed. Non-standard customization available, customized hotline 13538899292. | |||
