Specifications
| Model | Desktop type | Floor-standing type | |
| FJUGN series | FJUHDN series | ||
| Purpose | Used for debonding after cutting silicon wafers, glass, ceramics, and other products, UV blue film debonding | ||
| Material specifications | Supports 6"~12" Frames | ||
| UV unit | 1 set of LED-UV modules | ||
| UV wavelength | 365nm±5nm | ||
| UV exposure intensity#Note | 50~500mW/cm², real-time monitoring of irradiation intensity, programmable adjustment | ||
| Display/Settings/Operations | Touchscreen display, settings, and operation | ||
| Illumination mode | Automatic illumination | Set irradiation power and duration, and complete irradiation according to the set duration [Irradiation duration range: 0 - 9999.9 seconds (interval 0.1 seconds)] | |
| Step-up illumination | Multiple steps and loop counts are set; Set the irradiation power and duration for each step, operate according to the set cycle count, and operate according to the step parameters | ||
| Dimming/illumination control | Precise digital dimming and timer control [0 - 9999.9 seconds (interval time 0.1 seconds)] | ||
| LED temperature detection | Equipped with thermistors to monitor LED lamp temperature control | ||
| LED light source abnormal feedback | LED light source fault feedback, bright feedback, over-temperature error | ||
| LED light source cooling method | Forced air cooling of the fan | Intelligent cooling system with water cooling | |
| Loading/unloading | Manual | ||
| Gas | Nitrogen | ||
| Oxygen monitoring | The device can monitor oxygen concentration inside the chamber, and the interface displays oxygen content data | ||
| Nitrogen protection | 1) Equipped with a nitrogen protection cover for nitrogen protection, with adjustable flow rate | ||
| Irradiation method | Face array style | Scannable | |
| Scanning speed | 0~100mm/s, program can be set | ||
| Input voltage/frequency | AC 220V 50Hz / 60Hz | ||
| #Note: Based on our measurement benchmark, the values are representative values and not guaranteed. | |||