Products
Products
Products
Specifications
| series | 1515 series | 2020 series | 3228 series | 4639 series | ||||||||
| Irradiation intensity (regular)#Note1(mW/cm²) | 800 | 1,000 | Type A 300 | Type B 500 | Type C 800 | Type A 120 | Type B 200 | Type C 300 | Type A 120 | Type B 200 | Type C 300 | |
| Chamber Specifications (mm) | L160×W160×H160 | L210×W210×H140 | L320×W300×H250 | L460×W400×H250 | ||||||||
| Dimensions (mm) (Excluding alarm light) | L280×W260×H368 | L361×W323×H365 | L422×W415×H515 | L600×W551×H565 | ||||||||
| Light source wavelength#Note1 | 365nm±5nm | |||||||||||
| Illumination uniformity | Within the effective irradiation range, the light uniformity can reach over 90%. | |||||||||||
| LED light source cooling | Forced air cooling of the fan | Intelligent cooling system with water cooling | ||||||||||
| Estimated lifespan of the light source#Note2 | 20,000 hours (initial power set to 50%, at 25°C ambient temperature) | |||||||||||
| Display/Settings/Operations | Display/settings/operation of the touchscreen | |||||||||||
| Illumination mode | Automatic illumination | Set irradiation power and duration, and complete irradiation according to the set duration [Irradiation duration range: 0 - 9999.9 seconds (interval 0.1 seconds)] | ||||||||||
| Manual irradiation | Set the illumination power and manually control the duration or prolonged illumination | |||||||||||
| Step-up illumination | Multiple steps and loop counts are set; Set the irradiation power and duration for each step, operate according to the set cycle count, and operate according to the step parameters | |||||||||||
| Dimming/illumination control | Digital dimming, manual illumination control or timer control [0 - 9999.9 seconds (interval 0.1 seconds)] | |||||||||||
| Illuminating the gate | When the door is closed, automatic lighting is enabled to illuminate and cure (harden). | |||||||||||
| Box door locking function | Equipped with an electronic lock, the door cannot be opened during illumination | |||||||||||
| LED temperature detection | Equipped with thermistors to monitor LED lamp temperature control | |||||||||||
| LED light source abnormal feedback | LED light source fault feedback, bright feedback, over-temperature error | |||||||||||
| Input voltage/frequency | AC 220V 50Hz / 60Hz | |||||||||||
| Operating temperature/humidity range | 0°C ~ +35°C / 30%RH ~ 85%RH (non-condensing) | |||||||||||
| Storage temperature/humidity range | -10°C ~ +60°C / 30%RH ~ 85%RH (non-condensing) | |||||||||||
| Additional features#Note | Online light intensity/energy output (#Note: standard does not include this function; if needed, please inform us) | |||||||||||
| #Note1: Other wavelengths can be customized, such as 395, 405, 420, 470, 520nm, etc. #Note2: According to our company's measurement benchmark, the values are representative values and not guaranteed values. Non-standard customization available, customized hotline 13538899292. | ||||||||||||
