Products
Products
Products
Common specifications for adhesive hardening series light sources
| series | TMX series | FMX series | |||||||||||
| Irradiation Range (Conventional) | Width W series | 06 series | 08 Series | 10 series | 12 series | 15 series | 20 series | 25 series | 30 series | 06 series | 08 Series | 10 series | 12 series |
| 60mm | 80mm | 100mm | 120mm | 150mm | 200mm | 250mm | 300mm | 60mm | 80mm | 100mm | 120mm | ||
| Length L series | 60 | 80 | 100 | 120 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | |
| Light source wavelength#Note 1 | 365nm±5nm | ||||||||||||
| Peak Irradiation Intensity (Conventional) (Illumination height 30mm)#Note2 | 600mW/cm² | 1,000mW/cm² | 1,500mW/cm² | 2,000mW/cm² | |||||||||
| Estimated lifespan#Note2 | 20,000 hours (initial power set to 50%, at 25°C ambient temperature) | ||||||||||||
| Dimming control | Precise digital dimming, 10%-100% (1% scale) | Precise digital dimming, 1%-100% (1% scale) | |||||||||||
| LED bead abnormal feedback | LED lamp bead fault feedback, bright feedback, and over-temperature errors | Single LED LED bead fault feedback, light feedback, and over-temperature errors | |||||||||||
| LED lamp bead temperature detection | Equipped with thermistors to monitor the operating temperature of LED lamp beads | ||||||||||||
| Cooling Method | Forced air cooling of the fan | Intelligent cooling system with water cooling | |||||||||||
| Shell material | Aluminum alloy - machining | ||||||||||||
| Surface treatment | Anodizing treatment | Painted finish | |||||||||||
| Operating voltage/frequency | AC 220V,50Hz/60Hz | AC 380V,50Hz/60Hz | |||||||||||
| Operating temperature/humidity range | 0°C ~ +35°C / 30%RH~85%RH (non-condensing) | ||||||||||||
| Storage temperature/humidity range | -10°C ~ +60°C / 30% RH~85% RH (non-condensing) | ||||||||||||
| #Note1: In addition to the 365nm wavelength, there are also 395nm, 405nm, 420nm, 470nm, and others. #Note2: According to our company's measurement standards, the values are representative values and not guaranteed. Non-standard customization available; customization hotline: 13538899292. | |||||||||||||
Common specifications for adhesive hardening series light sources
| series | TMX series | FMX series | |||||||||
| Illumination range (Regular) (mm) | Width W series | 06 series | 08 Series | 10 series | 12 series | 15 series | |||||
| 60mm | 80mm | 100mm | 120mm | 150mm | |||||||
| Length L series | 60 | 80 | 100 | 120 | 150 | 200 | 250 | 300 | 350 | 400 | |
| Light source wavelength#Note1 | 365nm±5nm | ||||||||||
| Peak Irradiation Intensity (Conventional) (Illumination height 30mm)#Note2 | 2,500mW/cm² | 3,000mW/cm² | 3,500mW/cm² | ||||||||
| Estimated lifespan#Note2 | 20,000 hours (initial power set to 50%, at 25°C ambient temperature) | ||||||||||
| Dimming control | Precise digital dimming, 10% - 100% (1% scale) | Precise digital dimming, 1% - 100% (1% scale) | |||||||||
| LED bead abnormal feedback | LED LED bead fault feedback, bright feedback, and over-temperature errors | Fault feedback for individual LED lamp beads, bright feedback, and overtemperature errors | |||||||||
| LED lamp bead temperature detection | Equipped with thermistors to monitor the operating temperature of LED lamp beads | ||||||||||
| Cooling Method | Forced air cooling of the fan | Intelligent cooling system with water cooling | |||||||||
| Shell material | Aluminum alloy - machining | ||||||||||
| Surface treatment | Anodizing treatment | Painted finish | |||||||||
| Operating voltage/frequency | AC 220V , 50Hz/60Hz | AC 380V , 50Hz/60Hz | |||||||||
| Operating temperature/humidity range | 0°C ~ +35°C / 30%RH ~ 85%RH (non-condensing) | ||||||||||
| Storage temperature/humidity range | -10°C ~ +60°C / 30%RH ~ 85%RH (non-condensing) | ||||||||||
| #Note1: In addition to the 365nm wavelength, there are also 395nm, 405nm, 420nm, 470nm, and others. #Note2: According to our company's measurement standards, the values are representative values and not guaranteed. Non-standard customization available; customization hotline: 13538899292. | |||||||||||
Common specifications for controllers
| series | TUV-30B series | FJUV-10B series | |
| Input voltage/frequency | AC 220V,50Hz/60Hz | AC 380V,50Hz/60Hz | |
| Display/Settings/Operations | Display/settings/operation of the touchscreen | Display/settings/operation of the touchscreen | |
| Illumination mode | Automatic illumination | Set irradiation power and duration, and complete irradiation according to the set duration [Irradiation duration range: 0 - 9999.9 seconds (interval 0.1 seconds)] | |
| Manual irradiation | Set the illumination power and manually control the duration or prolonged illumination | ||
| Step-up illumination | Multiple steps and loop counts are set; Set the irradiation power and duration for each step, operate according to the set cycle count, and operate according to the step parameters | ||
| External control | Method | I/O backplane | RS232 | RS485 | |
| External input | LED lighting | Programming Selection | External anomaly stops | ||
| External output | Device power ON | Irradiation preparation complete | Illuminating | Warning | Exception | Emergency stop | ||
| Level trigger | Rising edge triggered | High-level trigger | ||
| Dimming control | Precise digital dimming, 10%-100% (1% scale) | Precise digital dimming, 1%-100% (1% scale) | |
| LED bead abnormal feedback | LED LED bead fault feedback, bright feedback, and over-temperature errors | Fault feedback for individual LED lamp beads, bright feedback, and overtemperature errors | |
| LED lamp bead temperature feedback | Operating temperature feedback of LED lamp beads | ||
| Cooling Method | Forced air cooling of the fan | Forced air cooling of the fan | |
| Operating temperature/humidity range | 0°C ~ +35°C / 30% RH ~ 85% RH (non-condensing) | ||
| Storage temperature/humidity range | -10°C ~ +60°C / 30%RH~85%RH (non-condensing) | ||
| Additional features#注 | Online light intensity/energy output (Note: Standard features do not include this function; if needed, please inform us) | ||
Common specifications for coating/ink curing series light sources
| series | SHTMX series | ||||||||||||||||
| Illumination range (Regular) (mm) | Width W series | 03 Series | 04 Series | 06 series | |||||||||||||
| 30mm | 40mm | 60mm | |||||||||||||||
| Length L series | 60 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 800 | 1000 | 1200 | 1500 | |
| Light source wavelength | 395nm±5nm | ||||||||||||||||
| Peak Irradiation Intensity (Conventional)#Note (Illumination height 20mm) | 12,000mW/cm² | 15,000mW/cm² | |||||||||||||||
| Estimated lifespan#Note | 20,000 hours (initial power set to 50%, at 25°C ambient temperature) | ||||||||||||||||
| Dimming control | Precise digital dimming, 10% - 100% (1% scale) | ||||||||||||||||
| LED bead abnormal feedback | LED LED bead fault feedback, bright feedback, and over-temperature errors | ||||||||||||||||
| LED lamp bead temperature detection | Equipped with thermistors to monitor the operating temperature of LED lamp beads | ||||||||||||||||
| Cooling Method | Intelligent cooling system with water cooling | ||||||||||||||||
| Shell material | Aluminum alloy - machining | ||||||||||||||||
| Surface treatment | Anodizing treatment | Painted finish | |||||||||||||||
| Operating voltage/frequency | AC 220V , 50Hz/60Hz | AC 380V , 50Hz/60Hz | |||||||||||||||
| Operating temperature/humidity range | 0°C ~ +35°C / 30%RH ~ 85%RH (non-condensing) | ||||||||||||||||
| Storage temperature/humidity range | -10°C ~ +60°C / 30%RH ~ 85%RH (non-condensing) | ||||||||||||||||
| Note: According to our company's measurement standards, values are representative values and not guaranteed values. Non-standard customization available; customization hotline: 13538899292. | |||||||||||||||||
Common specifications for controllers
| series | TUV-30B series | TUV-60B series | |
| Input voltage/frequency | AC 220V 50Hz / 60Hz | AC 380V 50Hz / 60Hz | |
| Display/Settings/Operations | Touchscreen display, settings, and operation | ||
| Illumination mode | Automatic illumination | Set irradiation power, duration, and complete irradiation according to the set duration [Irradiation duration range: 0 - 9999.9 seconds (interval 0.1 seconds)] | |
| Manual irradiation | Set the illumination power and manually control the duration or prolonged illumination | ||
| Step-up illumination | Multiple steps and loop counts are set; Set the irradiation power and duration for each step, operate according to the set cycle count, and operate according to the step parameters | ||
| External control | Method | I/O backplane | RS232 | RS485 | |
| External input | LED lighting | programming selection | external abnormal stop | ||
| External output | Device power ON| Preparation for irradiation completed | Illumination in progress | Warning | Abnormal | Emergency stop | ||
| Level trigger | Rising edge trigger | High level trigger | ||
| Dimming control | Precise digital dimming, 10%-100% (1% scale) | ||
| LED bead abnormal feedback | LED LED bead fault feedback, bright feedback, and over-temperature errors | ||
| LED lamp bead temperature feedback | Operating temperature feedback of LED lamp beads | ||
| Cooling Method | Forced air cooling of the fan | ||
| Operating temperature/humidity range | 0°C ~ +35°C / 30%RH ~ 85%RH (non-condensing) | ||
| Storage temperature/humidity range | -10°C ~ +60°C / 30%RH ~ 85%RH (non-condensing) | ||
| Additional features#Note | Online light intensity/energy output (#Note: The standard configuration does not include this function; if this function is needed, please inform us) | ||
